12S30A PCM/BMS for 36V/12S Lifepo4 battery pack Description:
As we know, without PCM/BMS, the battery pack is easy to over charge and over discharge.
Here A123rc.com will release this kind of good-quality and competitive price PCM/BMS
which can protect your battery pack whose constant discharging current is 30A and max charging current is 10A.
What’s more, 12S30A PCM/BMS not only can protect the whole the battery, but also has a balance function.
As my experience, a lot of customers bought this kind of PCM/BMS, but they don’t know how to connect it to the battery pack correctly.
Thus, Let’s learn to how to connect this 12S30A PCM/BMS. Check photo and the following 12S connection way.
12S30A BMS Connection Way
1.Plug the balancing wire connector into the BMS, you will see the BMS marked as B+, B11,B10,B9...B1, B-.
2.Please find the general positive end of YOUR battery pack, and connect the B+ wire to the Your battery pack's general positive end.
3.Connect the B11 wire to the joint of the first cell(negative) and second cell(positve)
4.Connect the B10 wire to the joint of the second cell(negative) and the third cell(positive)
5.Follow the above way untill you connect the B1 wire to the joint of the eleventh cell(negative) and twelfth cell(postive)
6.The twelfth cell's negative end is the general negative end, which should be connected to the B- position on the BMS with an extra wire
7.You also need to use wires to connect P- and C- from the BMS
P- : You need to connect a black wire to the "P-" of BMS, and the other red wire will be connected to the battery's general positive end,
these two wires will be one pair of discharge wires, which should be connected to your controller or any other load.
This pair of wire must be strong enough to support the discharge current.
C- (CH-) : You need to connect a black wire on the "C-" of BMS , and the other red wire will be connected to the battery's general positive end,
these two wires will be one pair of charge wire, which should be connected to your charger.
12S30A PCM/BMS for 36V/12S Lifepo4 battery pack Specification:
1*12S30A PCM/BMS for 36V/12S Lifepo4 battery pack
-Estimated shipping weight: 0.18Kg